Chimney Rebuild

Chimney Rebuild with a New Clay Flue Liner in Seattle, WA

A chimney rebuilt on a craftsman-era home with the flue rebuilt inside it – new clay liner sections set course by course as the brick went up, and a stainless liner run for the appliance flue.

Project Details

Seattle, WA
Single-Family Residential
Chimney Rebuild with New Clay Flue Liner & Stainless Liner
2026

READY TO SOLVE THE FULL PROBLEM?

Get an Estimate

Tell us about your project and we’ll get back to you within the hour.

Why It Matters

Every Service Starts With the Full Picture.

Rebuilding a chimney is the one moment when the inside of it can be put right. The flue is what actually carries the heat and the combustion gases, and on a house of this age it is usually either unlined or lined with clay tiles that have cracked at the joints. None of that is visible once the brick is closed up, which is why it tends to get left. The first photo is the rebuild in progress: clay flue liner sections staged on the roof ready to be set, a stainless liner coiled beside them, and the brick going up around them.

The Solution

A Full-System Repair, Done Once.

Setting the liner as the chimney is built is the difference between a rebuild and a repair that looks like one. Each clay section is bedded and aligned as the courses rise, so the flue is continuous rather than stacked and hoped for, and the stainless liner for the appliance is run in the same pass instead of being fished down a finished chimney later. The staging, the level across the top and the brick stacked to hand in that photo are all there for the same reason: a rebuild is only as straight as the course under it.

Scope of Work

What We Did.

Chimney rebuilt in brick with new clay flue liner sections set as the work rose, a stainless liner run for the appliance flue, and the top finished with a cast crown, a rain cap and new base flashing. The second photo is the completed chimney.

Chimneyz works throughout Seattle, WA and the surrounding area.

Project Gallery

A Closer Look at the Work.

READY TO SOLVE THE FULL PROBLEM?

Get a Clear Inspection and the Right Repair Plan.

From chimney leaks and failing masonry to roofline issues and interior damage, Chimneyz helps homeowners identify the real source of the problem and fix it with one coordinated solution.

Technician repairing brick chimney crown

More Projects

Similar Work We've Completed.

Rusted steel firebox and the masonry behind it exposed after the surrounding wall was opened to the studs for removal

Interior Fireplace and Firebox Removal in Everett, WA

Everett, WA

Direct-vent fireplace set on its platform in open framing, with the vent pipe running up through the floor above and warm-air ducts to either side

Fireplace Installation in New Construction, Bothell, WA

Bothell, WA

Rebuilt brick chimney with a new cast crown, two black rain caps and new black base flashing

Two-Flue Chimney Rebuild with a Cast Crown in Snohomish, WA

Snohomish, WA

Completed brick chimney rebuild on a craftsman home with a new crown, rain cap and base flashing

Chimney Rebuild with a New Clay Flue Liner in Seattle, WA

Seattle, WA

CALL NOW