Chimney Rebuild
READY TO SOLVE THE FULL PROBLEM?
Tell us about your project and we’ll get back to you within the hour.
Why It Matters
A chimney serving two flues has to be read as two systems in one structure. Each flue needs its own clear path to the top and its own cap, and the crown has to span both while still shedding water off every edge of the masonry below. That is more demanding than it looks from the ground, which is why the top of a two-flue chimney is so often where the problems start – a crown cast flush with the brick, or a single cap over a shared opening, and water finds its way in at the joint between them.
The Solution
The crown here was cast in place and runs past the brick on all four sides, so rain coming off it lands clear of the faces instead of washing down them. Both flues are capped separately. Where the chimney meets the roof, the base flashing was run new and worked into the shingle courses rather than surface-sealed over them, because a sealed-over flashing is a repair with a clock on it. Taken together that is what a finished rebuild should look like from above: nothing on the top of it holding water.
Scope of Work
Chimney rebuilt in brick, topped with a cast crown overhanging on all four sides, black rain caps fitted to both flues, and new base flashing run into the roof. The photo is the finished chimney from the roof above it.
Chimneyz works throughout Snohomish, WA and the surrounding area.
READY TO SOLVE THE FULL PROBLEM?
From chimney leaks and failing masonry to roofline issues and interior damage, Chimneyz helps homeowners identify the real source of the problem and fix it with one coordinated solution.
More Projects