Chimney Removal

Exterior Masonry Chimney Removal in Edmonds, WA

A full-height brick chimney and the fireplace breast built against the deck elevation of a cedar-shingled home, taken down from the cap to the hearth with the siding, roof and deck around it kept intact.

Project Details

Edmonds, WA
Single-Family Residential
Exterior Masonry Chimney & Fireplace Breast Removal
2026

READY TO SOLVE THE FULL PROBLEM?

Get an Estimate

Tell us about your project and we’ll get back to you within the hour.

Why It Matters

Every Service Starts With the Full Picture.

An exterior chimney is not a free-standing column. It is tied into the wall sheathing, carried through the roof plane, and in this case built as a fireplace breast with a peaked brick shoulder set into the shingle siding. Taking one down is a structural and a weatherproofing job at the same time, because every course that comes off leaves an opening in something – the siding, the roof, or the deck surface it is standing on.

The Solution

A Full-System Repair, Done Once.

The sequence is what protects the house. The stack comes down from the cap in courses rather than being pulled, the roof penetration is opened and covered as the work reaches it, and the breast is cut back to the sheathing so the wall behind is left sound and ready to be framed and sided. The second photograph shows exactly that moment: the brick cut back, the original board sheathing exposed, and the peaked outline of the old breast still legible in the shingle line where it was removed. The deck is sheeted, the adjoining door opening is boarded, and the debris is kept on tarps. Chimney removal done this way leaves a wall that can be closed up properly, not one that has to be repaired first.

Scope of Work

What We Did.

Brick stack taken down through the roof plane, fireplace breast cut back to the sheathing, roof and wall openings protected as the work progressed, and the deck sheeted with debris contained on tarps. Photographed before, and part way through.

Chimneyz works throughout Edmonds, WA and the surrounding area.

Results

Before & After.

See the difference a full-system repair makes — from failing masonry and corroded flashing to a fully restored, watertight chimney.

Brick chimney and fireplace breast on the deck side of a cedar-shingled home, before removal
The same exterior chimney part way through removal, with the brick cut back and the peaked outline left in the shingle siding

Project Gallery

A Closer Look at the Work.

READY TO SOLVE THE FULL PROBLEM?

Get a Clear Inspection and the Right Repair Plan.

From chimney leaks and failing masonry to roofline issues and interior damage, Chimneyz helps homeowners identify the real source of the problem and fix it with one coordinated solution.

Technician repairing brick chimney crown

More Projects

Similar Work We've Completed.

Rusted steel firebox and the masonry behind it exposed after the surrounding wall was opened to the studs for removal

Interior Fireplace and Firebox Removal in Everett, WA

Everett, WA

Direct-vent fireplace set on its platform in open framing, with the vent pipe running up through the floor above and warm-air ducts to either side

Fireplace Installation in New Construction, Bothell, WA

Bothell, WA

Rebuilt brick chimney with a new cast crown, two black rain caps and new black base flashing

Two-Flue Chimney Rebuild with a Cast Crown in Snohomish, WA

Snohomish, WA

Completed brick chimney rebuild on a craftsman home with a new crown, rain cap and base flashing

Chimney Rebuild with a New Clay Flue Liner in Seattle, WA

Seattle, WA

CALL NOW