Gas Fireplace Installation

Gas Fireplace Insert Installation in Renton, WA

An open masonry firebox behind dated brass-framed doors, converted to a sealed gas insert. The stone surround stayed exactly as it was; what changed is the heat it puts into the room and the draft it stops pulling out of it.

Project Details

Renton, WA
Single-Family Residential
Gas Fireplace Insert Installation in an Existing Masonry Fireplace
2026

READY TO SOLVE THE FULL PROBLEM?

Get an Estimate

Tell us about your project and we’ll get back to you within the hour.

Why It Matters

Every Service Starts With the Full Picture.

An open masonry fireplace is a poor heater and a very effective chimney. With the damper open it draws warm room air up the flue continuously, and on a cold night a house can lose more heat through the fireplace than the fire returns. Glass doors like the brass-framed set in the first photo reduce that a little when they are shut, but they do not seal, and they do nothing about the fact that most of the heat from an open fire goes straight up the chimney rather than into the room.

The Solution

A Full-System Repair, Done Once.

An insert is a sealed appliance fitted into the opening that is already there. It draws its combustion air from outside and vents through a liner run up the existing flue, so the fire is isolated from the room air and the masonry does not have to be rebuilt to accommodate it. That is the part worth understanding: the stonework, the hearth and the opening are all original here. The work was in the liner run up the flue and the gas connection and insert itself, not in the visible masonry.

Scope of Work

What We Did.

A direct-vent gas insert set into the existing firebox, vented through the chimney, with the stone surround and hearth left untouched. A timber mantel beam was added across the stone above the opening. The second photo is the insert running.

Chimneyz works throughout Renton, WA and the surrounding area.

Results

Before & After.

See the difference a full-system repair makes — from failing masonry and corroded flashing to a fully restored, watertight chimney.

Open masonry fireplace with dated brass-framed glass doors set in a rough stone surround, before the gas insert
The same fireplace with a black direct-vent gas insert burning and a new timber mantel beam above it

Project Gallery

A Closer Look at the Work.

READY TO SOLVE THE FULL PROBLEM?

Get a Clear Inspection and the Right Repair Plan.

From chimney leaks and failing masonry to roofline issues and interior damage, Chimneyz helps homeowners identify the real source of the problem and fix it with one coordinated solution.

Technician repairing brick chimney crown

More Projects

Similar Work We've Completed.

Rusted steel firebox and the masonry behind it exposed after the surrounding wall was opened to the studs for removal

Interior Fireplace and Firebox Removal in Everett, WA

Everett, WA

Direct-vent fireplace set on its platform in open framing, with the vent pipe running up through the floor above and warm-air ducts to either side

Fireplace Installation in New Construction, Bothell, WA

Bothell, WA

Rebuilt brick chimney with a new cast crown, two black rain caps and new black base flashing

Two-Flue Chimney Rebuild with a Cast Crown in Snohomish, WA

Snohomish, WA

Completed brick chimney rebuild on a craftsman home with a new crown, rain cap and base flashing

Chimney Rebuild with a New Clay Flue Liner in Seattle, WA

Seattle, WA

CALL NOW