Why Chimney Flashing Fails in the PNW

2 min read

In the Pacific Northwest, chimney flashing failure is one of the most common reasons for water damage inside homes. Heavy rain, freeze-thaw cycles, and moss growth put constant pressure on the metal that seals the chimney to the roof.

Most roofers treat the chimney as an obstacle. They work around it. At Chimneyz, we treat the chimney-to-roof junction as the most critical part of the system. That’s why flashing problems keep coming back for homeowners who hired the wrong contractor.

Why Flashing Fails in Seattle and Western Washington

  • Constant moisture and moss that lifts metal over time
  • Thermal expansion and contraction from temperature swings
  • Poor original installation or aging materials
  • Roofers who don’t properly integrate new roofing with existing chimney masonry

When flashing fails, water doesn’t just stay on the roof. It travels down the chimney chase, into the attic, and onto ceilings and walls. By the time stains appear inside, the damage is often already advanced. In many cases the real source is failed chimney flashing and leak repair that was never addressed at the masonry level.

The Right Way to Repair Chimney Flashing

A proper repair starts with inspecting both the roofing side and the masonry side. We check for wood rot in the decking, deteriorated mortar, and failed step flashing or counterflashing. Then we rebuild the seal so it lasts. This often involves related masonry restoration work so the chimney itself is sound before new metal is installed.

If the crown is cracked or the brick is spalling, water can bypass even new flashing. That’s why we frequently pair flashing repairs with chimney crown work and full chimney repair.

Common Related Problems We See in the Seattle Area

Homeowners who call about flashing leaks often also have:

  • White chalky residue (efflorescence) on the brick
  • Moss growth that holds moisture against the metal
  • Deteriorated mortar joints that need tuckpointing
  • Roof issues that require a full roof repair or replacement integrated with the chimney

Serving Seattle, Bellevue, Tacoma, and communities across Western Washington. If you suspect flashing failure, schedule an inspection. Catching it early prevents much larger interior repairs later. Contact Chimneyz for a clear assessment of your chimney-to-roof junction.

New black base flashing where the rebuilt chimney meets the shingle roof
White Chimneyz logo with green dot

Washington’s trusted chimney, roofing, and masonry experts. Licensed, insured, and committed to protecting your home – one project at a time.

READY TO SOLVE THE FULL PROBLEM?

Get an Estimate

Tell us about your project and we’ll get back to you within the hour.

MORE FROM OUR BLOG

Veteran & senior programs.

Practical tips and expert advice to help you maintain and protect your home.

Upper courses of a brick chimney with spalled and flaking brick faces below the crown

Cracked Crown or Cracked Flue?

From the driveway, a chimney in trouble looks like a chimney in trouble. Two of the most common faults sit within a foot of each other at the top, and homeowners routinely describe one when

Read More »
CALL NOW